|
125cc 4-Stroke CDI (6 Pin for horizontal motor)
|
|
125cc HP Ignition Coil
|
|
|
|
|
|
|
CDI for the 4-stroke 125cc Engines.
|
High Performance Coil for the 125cc 4-stroke models .
|
|
|
|
125cc to 200cc 4-Stroke CDI (Vertical motor)
|
|
125cc to 200cc 4-Stroke CDI (Vertical motor)
|
|
|
|
|
|
CDI for the 4-stroke 70-110cc engines.
Specifications: 5 pin
|
CDI Ignition for the 125cc - 200cc 4-Stroke Engine.
|
|
|
|
2 Feet 4-stroke Fuel Line (24 inch)
|
|
200cc to 300cc Go-Kart 8.5 Inch Rotor
|
|
|
|
|
|
|
|
200cc to 300cc Go-Kart 8.5 Inch Rotor
Click on image for details.
|
|
|
|
26mm Insolater w/o-ring
|
|
3 Feet 4-stroke Fuel Line (36 inch)
|
|
|
|
|
|
|
|
|
|
|
|
4 Feet 4-stroke Fuel Line (48 inch)
|
|
4 Stroke Round Bar Slider set
|
|
|
|
|
|
|
|
|
|
|
|
4 Stroke Round Bar Slider set - Gold
|
|
4 Stroke Round Bar Slider set - Red
|
|
|
|
|
|
|
|
|
|
|
|
|
4-Stroke 150cc Cylinder Gasket set
|
|
4-Stroke 200cc Cylinder Gasket set
|
|
|
|
|
|
|
|
|
|
|
|
4-Stroke 200cc Cylinder Gasket set
|
|
4-Stroke 30mm Throttle Controller
|
|
|
|
|
|
|
|
Throttle Controller for 4-stroke models with the same style and dimensions.
|
|
|
|
4-Stroke 32mm Exhaust Gasket
|
|
4-Stroke 38mm Exhaust Gasket
|
|
|
|
|
|
Exhaust Gasket for the 4-Stroke engines.
Specifications:
Diameter: 32mm
|
Exhaust Gasket for the 4-Stroke engines.
Click on photo for more information.
|
|
|
|
4-Stroke 50cc Engine Gear Shaft
|
|
4-Stroke 50cc to 110cc Carburetor Jet Pack
|
|
|
|
|
|
|
Engine Gear Shaft for the 50cc 4-stroke.
|
|
|
|
|
4-Stroke 50cc to 125cc Oil Cooler Kit
|
|
4-Stroke 70cc Engine Gear Shaft
|
|
|
|
|
|
|
|
Engine Gear Shaft for the 70cc - 100cc 4-stroke engines.
|
|
|
|
4-Stroke Billet Gas Tank Cap
|
|
4-stroke Billet Throttle w/Soft Compound Grip
|
|
|
|
|
|
|
4-stroke Billet Gas for bikes that use the same gas tank caps.
|
Billet throttle can do 1/4 to full throttle. The soft compound grip set, has built in bar slider.
|
|
|
|
4-Stroke Clutch Lever
|
|
4-Stroke Disc Brake Hose Valve
|
|
|
|
|
|
|
|
4-Stroke Disc Brake Hose Valve (screw on ver)
|
|
|
|
4-Stroke Disc Brake Hose Valve
|
|
4-Stroke Engine Breather
|
|
|
|
|
|
|
4-Stroke Disc Brake Hose Valve (snap on ver)
|
Engine Breather for the 4-stroke engines.
|
|
|
|
4-Stroke Foot Brake Linkage (12 3/4 inch)
|
|
4-Stroke Foot Brake Linkage (14 3/8 inch)
|
|
|
|
|
|
|
|
|
|
|
|
4-stroke Head Breather
|
|
4-Stroke HP CDI (Ignitior)
|
|
|
|
|
|
These performance part helps to cool your motor better, which makes it
run better. Easy to install.
|
CDI for the 4-stroke 70-110cc Engines.
|
|
|
|
4-Stroke HP Ignition Cable/Spark Cap
|
|
4-Stroke Hydraulic Clutch
|
|
|
|
|
|
|
|
4-stroke Hydraulic Clutch Lever Assembly.
Universal: Can be used on Pocket bike and Pit Bike Engines.
|
|
|
|
4-Stroke Kick Starter (Straight Version)
|
|
4-Stroke Kick Starter- Curved (Extended Style)
|
|
|
|
|
|
Kick Starter Straight Version for 4-stroke models.
Specifications:
Shaft Hole Diameter: 12mm
Overall Length: 173mm
|
Kick Starter Extended Curved Style used on many 4-stroke models.
|
|
|
|
4-stroke Master Link for Size #420 chain
|
|
4-stroke Master Link for Size #428 chain
|
|
|
|
|
|
|
Master links used for the X6, X7/FS529A, and other 4-stroke pocket bikes with the #420 chain.
|
Master links for bigger motors that use the #428 size master link.
|
|
|
|
4-Stroke Muffler Clamp
|
|
4-stroke Spark Plug socket
|
|
|
|
|
|
|
4-Stroke Muffler Clamp (8cm diameter)
|
|
|
|
|
4-Stroke Stator Tool
|
|
4-Stroke Stock Ignition Coil 125cc
|
|
|
|
|
|
|
Stator Tool for the 4-Stroke Automatic Clutch
|
Stock coil for the 4-stroke 50cc -125cc models with the same style coil.
|
|
|
|
4-Stroke Temp Gage
|
|
41 tooth Rear Sprocket (4-stroke) 76mm
|
|
|
|
|
|
|
|
Specifications:
Size: #420
Center Diameter: 76 mm
|
|
|
|
5 Feet 4-stroke Fuel Line (60 inch)
|
|
6 Feet 4-stroke Fuel Line (72 inch)
|
|
|
|
|
|
|
|
|
|
|
|
Air Filter - 39mm Foam-HP
|
|
Air Filter - 35mm Foam-HP
|
|
|
|
|
|
High performance foam air filter element allows for greater airflow and improved performance.
*This air filter is most commonly used on four stroke engines with 39mm carburetor opening.
|
High performance foam air filter element allows for greater airflow and improved performance.
*This air filter is most commonly used on four stroke engines with 35mm carburetor opening.
|
|
|
|
Air Filter - 35mm w/plastic cover
|
|
Air Filter - Foam, Small
|
|
|
|
|
|
High performance air filter element allows for greater airflow and improved performance.
*This air filter is most commonly used on four stroke engines with 35mm carburetor opening.
|
Foam air filter for the 4-stroke engine.
Cylindrical Universal Air Filter.
|
|
|
|
Air Filter - Small Cone / 35mm
|
|
Brake - Alloy Dirt Bike Rear Hydraulic Brake
|
|
Our Price: $19.95
|
|
|
|
|
|
High performance air filter element allows for greater airflow and improved performance.
*This filter is most commonly used on four stroke engines.
|
Pit bike rear hydraulic brake. Made of high quality anodized aluminum.
|
|
|
|
Brake - Brake Disc
|
|
Brake - Dirt Bike Brake Shoes and Cover
|
|
|
|
|
|
|
Pit bike brake disk.
|
Specifications:
Brake Shoes Diameter: 110mm
Axle Hole: 12mm
Overall Diameter: 138mm
|
|
|
|
Brake - Dirt Bike Front Hydraulic Brake with Stainless Steel Oil Cable
|
|
Brake - Dirt Bike Rear Hydraulic Brake
|
|
|
|
|
|
Dirt Bike Front Hydraulic Brake with Stainless Steel Oil Cable
Specifications:
Duel Chamber Caliper
Caliper Bolt Hole Spacing: 43mm (center to center)
Brake line length: 44 inches (eye to eye)
Includes Brake Pads
|
Dirt Bike Rear Hydraulic Brake.
Caliper Specifications
Mounting Hole Spacing: 45mm (center to center)
Master Cylinder Specifications
Mounting Hole: 40mm or 50mm (center to center)
Linkage Rod Length: 110mm (can be adjusted 10mm more or less)
Brake Line Length: 19 inches
Includes Brake Pads
|
|
|
|
Brake - Dirt Bike Rear Hydraulic Brake Suitable Alloy Swing arm
|
|
Brake - Hydraulic, Front
|
|
|
Our Price: $39.95
Sale Price: $29.95
You save $10.00!
|
|
|
|
|
Dirt Bike Rear Hydraulic Brake
Suitable Alloy Swing arm
Caliper Specifications
Duel Cylinder
Axle Hole: 12mm
Oval Bracket Hole: W 12mm x L 78mm
Master Cylinder Specifications
Mounting Hole: 40mm or 50mm (center to center)
Linkage Rod Length: 110mm (can be adjusted 10mm more or less)
Brake Line Length: 14 inches
Includes Brake Pads
|
Complete hydraulic brake assembly with brake lever, sensor switch, reservoir, brake line and brake caliper.
Click on image for details.
|
|
|
|
Brake - Hydraulic, Rear (51" line)
|
|
Brake Disk Rotor - Dirt Bike Wavy Rotor 7 inch (76mm center hole diameter) Rotor
|
Our Price: $44.95
Sale Price: $34.95
You save $10.00!
|
|
|
|
|
|
Complete hydraulic brake assembly with brake lever, sensor switch, reservoir, brake line and brake caliper.
Click on image for details.
|
Pit bike brake disk.
|
|
|
|
Brake Foot Lever - CNC Foot Brake lever
|
|
Brake Lever - CNC Brake Lever Set (universal fit)
|
|
|
|
|
|
|
Foot Brake Lever for Pit bikes. Made of high quality C.N.C anodized aluminum.
|
CNC Brake Lever set. Universal fit for Dirt Dikes and other Motor bikes as well.
Color: red, blue
|
|
|
|
Brake Lever - CNC Folded & Adjustable Brake lever - (universal fit)
|
|
Brake Lever - Folded & Adjustable Alloy Brake Lever - (universal fit)
|
Our Price: $89.95
Sale Price: $79.95
You save $10.00!
|
|
|
|
|
|
CNC Folded & Adjustable Brake lever
Color: red, blue,silver, black, gold, green
Suitable dirt bike
|
Folded & Adjustable Alloy Brake Lever
Color: silver
|
|
|
|
Brake Pads - 52 x 32 x 7mm
|
|
Brake Pads - 77 x 42 x 7mm
|
|
|
|
|
|
|
Click on image for more details.
|
Click on image for more details.
|
|
|
|
Brake Pads - 85 x 40 x 9mm
|
|
Cam Shaft
|
|
|
|
|
|
|
Click on image for more details.
|
Cam Shaft for the 70-110cc 4-stroke engines.
|
|
|
|
Carburetor - 26mm, 110-140cc
|
|
Carburetor - High Performance MIKUNI (26mm VM22)
|
|
|
|
|
|
|
26mm carburetor for the 110-140cc 4-stroke engines.
|
High Performance MIKUNI 26mm VM22 carburetor.
Specifications:
Intake: 26mm
Mounting Bolts: 48mm (center to center)
Air filter Mounting: 39-40mm
|
|
|
|
Carburetor - High Performance MIKUNI (30mm VM22)
|
|
Carburetor - Stock, 50cc (w/gold color lever)
|
|
|
|
|
|
High Performance MIKUNI 30mm VM22 carburetor.
Specifications:
Intake: 30mm
Mounting Bolts: 48mm (center to center)
Air filter Mounting: 43-44mm
|
Stock carburetor for the 50cc 4-stroke engines.
|
|
|
|
CDI - 100 to 150cc, 4-Stroke Engine (4 pin)
|
|
CDI - 110cc, 4-Stroke Engine (5 pin)
|
|
|
|
|
|
|
CDI Ignition for the 100cc - 150cc 4-Stroke Engine.
|
CDI Ignition for the 110cc 4-Stroke Engines.
|
|
|
|
CDI - 150cc CDI (4 wire version)
|
|
CDI - 150cc CDI (5 wire version)
|
|
|
|
|
|
CDI for 150cc engines. Used mostly on ATVs and Dirt Bikes.
Plug: Four wire version
|
CDI for 150cc engines. Used mostly on ATVs and Dirt Bikes.
Plug: Five wire version
|
|
|
|
CDI - 50cc, FS529a (5 Pin)
|
|
CDI - Suitable for 125-150cc Pit bike
|
|
|
|
|
|
|
Fits the X7 4-Stroke/ FS529A and many other 4-stroke models that use a 5 pin CDI.
|
Racing C.D.I. for Pit bike engines 125-150cc. Increases mid range and top speed.
|
|
|
|
CDI - Suitable for 125-150cc Pit bike
|
|
Chain - Alloy Chain Adjuster
|
|
|
|
|
|
|
Racing C.D.I. for Pit bike engines 125-150cc. Increases mid range and top speed.
|
Alloy Chain Adjuster
|
|
|
|
Chain - Alloy Chain Guide
|
|
Chain - Alloy Chain Guide
|
|
|
|
|
|
Alloy Chain Guard
Color: red,blue,black, silver, green,gold
Suitable dirt bike
|
Alloy Chain Guard
Includes:
Chain Guide, Roller, Tension Spring and Arm.
|
|
|
|
Chain - FS529a
|
|
Chain - Tensioner - Pair (12mm axle hole)
|
|
|
|
|
|
Fits X7 4-Stroke/ FS529A and other bikes with the same chain dimensions. Chain # 420.
Click on photo for more information.
|
Chain Tensioner Pair for bikes with a 12mm axle hole.
|
|
|
|
Chain Breaker - Suitable for Chain 420 & 428
|
|
Choke Cable, FS
|
|
|
Our Price: $19.95
Sale Price: $11.95
You save $8.00!
|
|
|
|
|
|
Chain Breaker Suitable Chain 420 & 428
|
Specifications
Inner cable: 23 inches
Outer cable cover: 20 inches
|
|
|
|
Chrome Round Bar Slider set
|
|
Clutch - Manual, 50-110cc
|
|
|
|
|
|
|
|
4-Stroke 50cc - 110cc Clutch (Manual Shift)
|
|
|
|
Clutch - Semi Automatic, 50-110cc
|
|
Clutch - Single Auto A, FS
|
|
|
|
|
|
|
Semi Automatic clutch for the 4-Stroke 50cc - 110cc engine.
|
4-Stroke 50cc - 110cc Clutch (Automatic)
|
|
|
|
Clutch - Stock, FS529a
|
|
Coil - High Performance 110-125cc
|
|
|
|
|
|
|
Fits:
> X7 4-Stroke, FS529A
|
High output coil for 50-125cc engines.
|
|
|
|
Crank Case Cover - 110cc/125cc Stator/Chain cover
|
|
Crank Case Cover - 4-Stroke 110cc Right side Motor cover Assembly (for Manual Shift motors)
|
|
|
|
|
|
|
|
4-Stroke 110cc Right side Motor cover Assembly (for Manual Shift motors)
|
|
|
|
Crank Case Cover - 4-Stroke 110cc Right side Motor cover-bare cover
|
|
Crank Case Cover - 4-Stroke 70cc to 110cc Right side (Kick Start Version)
|
|
|
|
|
|
|
Crank Case Cover - 4-Stroke 110cc Right side Motor cover-bare cover
|
4-Stroke 70cc to 110cc Right side for automatic motor with kick start.
|
|
|
|
Crank Case Cover - 4-Stroke 70cc to 110cc Right side Motor cover (Electric Start Version)
|
|
Crank Case Cover - 4-Stroke Pinion Cover (version 1)
|
|
|
|
|
|
|
4-Stroke 70cc to 110cc Right side Motor cover for automatic motors with electric start.
|
|
|
|
|
Crank Case Cover - 4-Stroke Pinion Cover (version 2)
|
|
Crank Case Cover - 4-Stroke Right Cover Verison B
|
|
|
|
|
|
|
|
4-Stroke Right Cover Verison B for kick start motor.
|
|
|
|
Crank Case Cover - 4-Stroke Right Cover Version A
|
|
Crank Case Cover - 4-Stroke Stator/Upper Chain Cover
|
|
|
|
|
|
|
4-Stroke Right Cover Verison A for kick start motors.
|
|
|
|
|
Crank Case Cover - Alloy Open Chain Left Stator Cover
|
|
Crank Case Cover - Silver Lower Stator Cover (Version 3)
|
|
|
|
|
|
|
|
|
|
|
|
Crank Case Cover - Silver Stator/ Cover (Version 2)
|
|
Crank Seals - 4-Stroke 50cc to 110cc Crank Seal
|
|
|
|
|
|
|
|
4-Stroke 50cc to 110cc Crank Seal
|
|
|
|
Crank Shaft - 100cc/110cc 4-stroke Crankshaft
|
|
Crank Shaft - 50cc 4-stroke Crankshaft
|
|
|
|
|
|
|
100cc to 110cc 4-Stroke Crank Shaft
|
50cc 4-stroke Crank Shaft
|
|
|
|
Crank Shaft - 70cc/90cc 4-stroke Crankshaft
|
|
Cylinder Block - 100cc
|
|
|
|
|
|
|
70cc to 90cc 4-Stroke Crank Shaft
|
4-Stroke 100cc Cylinder Head Block
|
|
|
|
Cylinder Block - 100cc
|
|
Cylinder Block - 70cc
|
|
|
|
|
|
|
|
100cc Cylinder Block (4-stroke)
|
4-Stroke 70cc Cylinder Block
|
|
|
|
Cylinder Block - 90cc
|
|
Cylinder Block A - 110cc
|
|
|
|
|
|
|
|
90cc Cylinder Block (4-stroke)
|
110cc Cylinder Head Block (4-Stroke)
|
|
|
|
Cylinder Block A - 70-90cc
|
|
Cylinder Block B - 110cc
|
|
|
|
|
|
|
|
70cc/90cc Cylinder Head
|
110cc Cylinder Block (4-stroke)
Click on image for details.
|
|
|
|
Cylinder Block B - 70-90cc, F
|
|
Cylinder Block Gasket - 100cc (51mm)
|
|
|
|
|
|
|
|
70cc/90cc Cylinder Head Housing
|
4-Stroke 100cc Cylinder Block Gasket
|
|
|
|
Cylinder Block Gasket - 110cc (53mm)
|
|
Cylinder Block Gasket - 50cc (40mm)
|
|
|
|
|
|
|
4-Stroke 110cc Cylinder Block Gasket
|
4-Stroke 50cc Cylinder Block Gasket
|
|
|
|
Cylinder Block Gasket - 70-90cc (48mm)
|
|
Cylinder Block Gasket Set - 100cc (Complete Set)
|
|
|
|
|
|
|
4-Stroke 70cc/90cc Cylinder Block Gasket
|
4-Stroke 100cc Cylinder Block Gasket
|
|
|
|
Cylinder Block Gasket Set - 110cc (Complete Set)
|
|
Cylinder Block Gasket Set - 50cc (Complete Set)
|
|
|
|
|
|
|
Complete head gasket set for the 110cc four stoke engines.
|
Complete head gasket set for the 50cc four stoke engines.
|
|
|
|
Cylinder Block Gasket Set - 70-90cc (Complete Set)
|
|
Cylinder Head - 110cc Cylinder Head
|
|
|
|
|
|
|
Complete head gasket set for the 70-90cc four stoke engines.
|
Cylinder head for the 110cc 4-stroke engine.
|
|
|
|
Cylinder Head - 110cc Cylinder Head (complete with valves and lifters)
|
|
Cylinder Head - 50cc Cylinder Head
|
|
|
|
|
|
Cylinder head for the 110cc 4-stroke engine.
Complete head assembly with valve and lifters.
|
Cylinder head and piston for the 50cc 4-stroke engine.
|
|
|
|
Cylinder Head - 50cc Cylinder Head (complete with valves and lifters)
|
|
Cylinder Head - 70cc Cylinder Head
|
|
|
|
|
|
Cylinder head for the 50cc 4-stroke engine.
Complete head assembly with valve and lifters.
|
Cylinder head and piston for the 70cc 4-stroke engine.
|
|
|
|
Cylinder Head - 70cc Cylinder Head (complete with valves and lifters)
|
|
Dip Stick - CNC Oil Dip Stick
|
|
|
|
|
|
Cylinder head for the 70cc 4-stroke engine.
Complete head assembly with valve and lifters.
|
CNC Oil Dip Stick
Color: red, blue,silver, black, gold
Suitable dirt bike & atv
|
|
|
|
Dip Stick - Oil Dip Stick with temperature gauge.
|
|
Dip Stick, FS
|
|
|
|
|
|
|
Oil Dip Stick with temperature gauge.
|
4-stroke Oil Dip Stick
|
|
|
|
Dirt Bike Helmet
|
|
Engine - 110cc 4-Stroke Auto
|
|
|
|
|
|
Standard: DOT
High density EPS.
Shell injected ABS
UV Painting.
Size: XL, L, M. and S.
Double D chin strap.
Colors: Red, Black, Blue, Silver.
Not sure of your size?
Simply measure around your head, about one inch over your eyebrows, and
just over your ears. Measure a few times to get a consistent size. Click on helmet to see helmet size chart.
|
Description:
> 110cc 4-stroke
> Automatic transmission
|
|
|
|
Engine - 110cc 4-Stroke Manual
|
|
Engine - 90cc 4S w/ Carb- PitD
|
Our Price: $399.95
Sale Price: $325.95
You save $74.00!
|
|
|
|
|
|
|
Install a new 110cc 4 Stroke Motor in your 49cc or 70cc 4 Stroke pocket Bike. Incredibly powerful gains made simple. Fits many models.
|
Description:
> 90cc 4-stroke
> Manual transmission
> Automatic clutch
>For Dirt Bike
|
|
|
|
Engine - CNC Engine Dress Up Kit
|
|
Fly Wheel Removal Tool
|
|
|
|
|
|
|
Engine Dress Up Kit
|
Tool sets for Flywheel
Removal tool for 50cc - 200cc fly wheels / stator drums.
|
|
|
|
Foot Pegs - CNC Foot Pegs
|
|
Frame - X7, 4-Stroke
|
|
|
|
|
|
|
High Quality CNC Foot Pegs. These are very well made CNC foot pegs with an awesome anodized finish. Suitable for Pit bike, Mini MX, Mini Dirt bikes
|
Frame for the X7 4-Stroke.
|
|
|
|
Gas Cap - Aluminum Gas Cap
|
|
Gas Tank
|
|
|
|
|
|
Gas cap for Dirt Bikes and ATVs.
Specifications:
Inner Thread Diameter: 1.92 inch or 50-52mm
Overall Diameter: 3.26 inch or 83mm
Thickness: 0.98 inch or 25mm (at thickest point)
|
gas tank
|
|
|
|
Gasket - Complete Gasket Set 110cc
|
|
Gasket - 4-Stroke 50cc to 110cc Left CrankCase Gasket
|
|
|
|
|
|
|
Engine full gasket sets
All kinds are available
|
4-Stroke 50cc to 110cc Left CrankCase Gasket
|
|
|
|
Gasket - 4-Stroke 50cc to 110cc Right Crank Case Gasket
|
|
Gasket Set - 100cc, 4-stroke (complete gasket set)
|
|
|
|
|
|
|
Gasket - 4-Stroke 50cc to 110cc Right Crank Case Gasket
|
4-Stroke 100cc Upper Head Gasket set
|
|
|
|
Gasket Set - 110cc, 4-stroke (complete gasket set)
|
|
Gasket Set - 125cc, 4-stroke (complete gasket set)
|
|
|
|
|
|
|
4-Stroke 110cc Upper Head Gasket set
|
4-Stroke 125cc Upper Head Gasket set
|
|
|
|
Gasket Set - 50cc, 4-stroke (complete gasket set)
|
|
Gasket Set - 70cc, 4-stroke (complete gasket set)
|
|
|
|
|
|
|
4-Stroke 50cc Upper Head Gasket set
|
4-Stroke 70/90cc Upper Head gasket and crank case gasket set.
|
|
|
|
GY6 59mm Alloy Big Bore Kit
|
|
GY6 Turbo Fan
|
|
|
|
|
|
|
comes with a 59mm Aluminum cylinder head, 59mm aluminum cylinder block, High Performance Camshaft. This performance Kit is ready to bolt on without any modification. can fit Honda base Gy6 Engine & China Cloned Gy6 152QMI, 157QMJ
|
GY6 TURBO FAN. Made of SPECIAL, HIGH STRENGTH PLASTICS AND with a new design, this TURBO fan will increase air flow and increase the cooling efficiency!
|
|
|
|
Handelbar - Alloy HandleBar
|
|
Handelbar - Alloy HandleBar
|
|
|
|
|
|
|
Alloy HandleBar
Color: red, blue,silver, black, gold, green
Suitable dirt bike
|
Alloy HandleBar
Color: red, blue,silver, black, gold, green
Suitable dirt bike
|
|
|
|
Handlebar Pad
|
|
Head Kit, Upgrade 50 - 70cc
|
|
|
|
|
|
|
Handlebar Pad
|
4-Stroke 70cc Conversion Head Kit (Upgrade for 50cc motor) This head kit lets you convert your 50cc motor into a 70cc motor. It doesn't matter if your motor is automatic motor or manual shift motor.
|
|
|
|
Head Kit, Upgrade 90 to 100cc
|
|
Ignition Coil - 50, 70 and 110cc
|
|
|
|
|
|
|
4-Stroke 100cc Conversion Head Kit (Upgrade for 90cc motor) This head kit lets you convert your 90cc motor into a 100cc motor. It doesn't matter if your motor is automatic motor or manual shift motor.
|
Fits X7 4-Stroke/ FS529A and other 4-stroke models with the same style coil.
|
|
|
Intake Manifold - 20mm / 55mm Tall
(HX 9)
|
|
Intake Manifold - 22mm / 60mm Tall
(ZJ 17)
|
|
|
|
|
|
Specifications:
Marking: 9 HX
Intake diameter: 20mm
Height: 55mm
|
Specifications:
Marking: ZJ17
Intake diameter: 22mm
Height: 60mm
|
|
|
Intake Manifold - 22mm / 65mm Tall
(DZ 57)
|
|
Intake Manifold - 22mm / 70mm Tall
(ZJ 67)
|
|
|
|
|
|
Specifications:
Marking: DC 57
Intake diameter: 22mm
Height: 65mm
|
Specifications:
Marking: ZJ 67
Intake diameter: 22mm
Height: 70mm
|
|
|
|
Key - Blank key for Chinese Bikes
|
|
Kick Start - CNC+Stainless Steel Bracket
|
|
|
|
|
|
|
Blank key for Chinese scooters and pocket bikes.
|
Kick Start with stylish design. Made of high quality CNC aluminum with strong stainless steel mounting bracket.
|
|
|
|
Kick Start - CNC+Stainless Steel Bracket (lighting Bolt Design)
|
|
Kill Switch
|
|
|
|
|
|
|
Kick Start with stylish design. Made of high quality CNC aluminum with strong stainless steel mounting bracket.
|
Universal Kill Switch with two wires.
|
|
|
|
Kill Switch - Dirt Bike Kill Switch
|
|
Kill Switch - Dirt Bike Kill Switch
|
|
|
|
|
|
|
Dirt Bike Kill Switch
|
Dirt Bike Kill Switch
|
|
|
|
Oil Cable - Steal Braided 8mm
|
|
Oil Cooler
|
|
|
|
|
|
Steel Braided Oil Cable
Suitable for Dirt Bikes, ATVs and other Motor Bikes.
|
|
|
|
|
Oil Cooler - Alloy Oil Cooler
|
|
Oil Cooler Tube - 4-stroke
|
|
|
|
|
|
Alloy Oil Cooler
Color: Silver
|
|
|
|
|
Piston - 100cc
|
|
Piston - 100cc Piston, Wrist pin, & C-clips (4-stroke)
|
|
|
|
|
|
100cc Piston (4-stroke).
Click on photo for more information.
|
100cc Piston with Wrist pin & clips (4-stroke)
Click on photo for more information.
|
|
|
|
Piston - 110cc
|
|
Piston - 110cc Piston, Wrist pin, & C-clips (4-stroke)
|
|
|
|
|
|
110cc Piston (4-stroke)
Click on photo for more information.
|
110cc Piston, Wrist pin, & C-clips (4-stroke)
Click on photo for more information.
|
|
|
|
Piston - 125cc Piston, Wrist pin, & C-clips (4-stroke)
|
|
Piston - 50cc, 4-Stroke
|
|
|
|
|
|
125cc Piston w/ Wrist pin & clips (4-stroke)
Click on photo for more information.
|
Piston for the 50cc 4-stroke engines and other models with the same size piston.
Click on photo for more information.
|
|
|
|
Piston - 50cc, Piston, Wrist pin, & C-clips (4-stroke)
|
|
Piston - 70cc, 4-stroke
|
|
|
|
|
|
50cc Piston, Wrist pin, & C-clips (4-stroke)
Click on photo for more information.
|
70cc Piston (4-stroke).
Click on photo for more information.
|
|
|
|
Piston - 70cc-90cc Piston, Wrist pin, & C-clips (4-stroke)
|
|
Piston - 90cc, 4-stroke
|
|
|
|
|
|
70cc-90c Piston with Wrist pin & clips (4-stroke)
Click on photo for more information.
|
90cc Piston (4-stroke).
Click on photo for more information.
|
|
|
|
Piston - Clips for 70-90cc Piston
|
|
Piston - Wirst pin for 70-90cc Piston (38.5mm x 13mm)
|
|
|
|
|
|
|
70cc Piston (4-stroke).
Click on photo for more information.
|
70cc Piston (4-stroke).
Click on photo for more information.
|
|
|
|
Piston Rebuild Kit - 110cc
|
|
Piston Rebuild Kit - 125cc
|
|
|
|
|
|
110cc Piston rebuild kit.
Includes: Piston, Rings, Wrist Pin and Clips
|
125cc Piston rebuild kit.
Includes: Piston, Rings, Wrist Pin and Clips
|
|
|
|
Piston Ring Set - 100cc
|
|
Piston Ring Set - 110cc
|
|
|
|
|
|
100cc Piston Rings (4-stroke).
Click on photo for more information.
|
110cc Piston Rings Set (4-stroke).
Click on photo for more information.
|
|
|
|
Piston Ring Set - 70cc-90cc
|
|
Piston Rings Set - 125cc
|
|
|
|
|
|
70cc/90cc Piston Ring Set (4-stroke).
Click on photo for more information.
|
125cc Piston Rings Set (4-stroke).
Click on photo for more information.
|
|
|
|
Piston Rings Set - 50cc
|
|
Rocker Arm - 4-Stroke Rocker Arm (50cc to 110cc)
|
|
|
|
|
|
50cc Piston Rings Set (4-stroke).
Click on photo for more information.
|
4-Stroke Rocker Arm (50cc to 110cc)
|
|
|
|
Rotor - Inner Rotor Kit with alloy plate, clear cover and C.D.I.
|
|
Shifter - Adjustable Foot Shifter
|
|
|
|
|
|
|
High performance Inner Rotor Kit with anodized aluminum plate, clear cover and C.D.I.
|
Universal adjustable foot shifter for Dirt Bikes and Pit Bikes and other models with the same style shifter.
|
|
|
|
Shifter - Adjustable Foot Shifter - Blue
|
|
Shifter - Adjustable Foot Shifter - Chrome
|
|
|
|
|
|
|
Universal adjustable foot shifter.
The mounting spindle opening is 11mm / .44 inches.
|
Universal adjustable foot shifter.
The mounting spindle opening is 11mm / .44 inches.
|
|
|
|
Shifter - Adjustable Foot Shifter - Red
|
|
Shifter - Adjustable Foot Shifter - Yellow
|
|
|
|
|
|
|
Universal adjustable foot shifter.
The mounting spindle opening is 11mm / .44 inches.
|
Adjustable Foot Shifter for the Pit Bike, Dirt Bikes, and other models with the same shifter dimensions.
|
|
|
|
Shifter - Retractable Foot Shifter
|
|
Shifter - Retractable Foot Shifter - Black
|
|
|
|
|
|
|
Retractable Foot Shifter for the X18 and other 4-stroke models with the same Shifter dimensions.
|
Retractable Foot Shifter for the X18 and other 4-stroke models with the same Shifter dimensions.
|
|
|
|
Shifter - Retractable Foot Shifter - Silver
|
|
Shifter Lever - Steel Shifter Lever
|
|
|
|
|
|
|
|
Retractable Foot Shifter for the X18 and other 4-stroke models with the same Shifter dimensions.
|
Steel Shifter Lever
Suitable dirt bike
|
|
|
|
Shifter lever - Adjustable CNC Shifter Lever
|
|
Shifter Lever - CNC Shifter Lever
|
|
|
|
|
|
|
Adjustable CNC Shifter Lever
Color: red, blue,silver, black, gold, green
Suitable dirt bike
|
CNC Shifter Lever
Color: red, blue,silver, black, gold, green
Suitable for ATV
|
|
|
|
Shifter Lever - CNC Shifter Lever - 12mm
|
|
Shifter Lever - Folded CNC Shifter Lever
|
|
|
|
|
|
|
Light weight CNC Shifter with retractable lever.
|
Folded CNC Shifter Lever
Color: red, blue,silver, black, gold, green
Suitable dirt bike
|
|
|
|
Shock - CNC Linkage for rear mono shock (pair)
|
|
Shock - Dirt Bike Shock 10.25 inch or 260mm
|
|
|
|
|
|
|
Linkage for rear mono shock.
|
Pit bike rear mono shock 260mm. Made of high quality C.N.C anodized aluminum and high grade steal.
|
|
|
|
Shock - Dirt Bike Shock 11 inch or 280mm
|
|
Shock - Dirt Bike Shock 280mm (red)
|
|
|
|
|
|
|
Pit bike rear mono shock 280mm. Made of high quality C.N.C anodized aluminum and high grade steal.
|
Pit bike rear mono shock with 280mm. Made of high quality C.N.C anodized aluminum and high grade steel.
|
|
|
|
Shock - Dirt Bike Shock 380mm (blue)
|
|
Skid Plate
|
|
|
Our Price: $34.95
Sale Price: $29.95
You save $5.00!
|
|
|
|
|
|
Pit bike rear mono shock can be adjusted from 320mm to 380mm. Made of high quality C.N.C anodized aluminum and high grade steel.
|
Alloy Engine Guard Skid Plate for Pit & Dirt Bikes.
Colors: red, blue,silver, black, gold
Specifications:
Overall Length: 13 1/4 inches
Rear mounting holes: 3 1/2 inches
Front mounting bracket Length: 3 3/4 inches
Front mounting bracket width: 4 1/4 inches
|
|
|
|
Socket Tool set
|
|
Socket Tool set with Spark Plug socket
|
|
|
|
|
|
|
|
|
|
|
|
Spark Plug - Iridium High Performance Spark Plug (CR8HIX)
|
|
Spark Plug Cable - Split Fire Twin Core
|
|
|
|
|
|
Made with Iridium, Stronger then Platinum, Higher melting point.
Requires less voltage to spark, burns more of the fuel in the cylinder, sparks at leaner air/fuel mixtures.
Works on 110-150cc engines.
|
Split Fire Twin Core duel firing path wire sets 8.8mm
SplitFire duplicates original equiptment fit, and outperforms any wire set you can buy!
|
|
|
|
Spokes - 2.75 inch (90 degree Angle)
|
|
Spokes - 3 inch (90 degree Angle)
|
|
|
|
|
|
Set of 28 spokes with 90 degree Angle.
Size: 2.75 inch
|
Set of 28 spokes with 90 degree Angle.
Size: 3 inch
|
|
|
|
Spokes - 3.75 inch (90 degree Angle)
|
|
Spokes - 4.50 inch (90 degree Angle)
|
|
|
|
|
|
Set of 28 spokes with 90 degree Angle.
Size: 3 3/4 inch
|
Set of 28 spokes with 90 degree Angle.
Size: 4 1/2 inch
|
|
|
|
Spokes - 4.75 inch (90 degree Angle)
|
|
Spokes - 5 5/8 inch (90 degree Angle)
|
|
|
|
|
|
Set of 28 spokes with 90 degree Angle.
Size: 4 3/4 inch
|
Set of 28 spokes with 90 degree Angle.
Size: 5 5/8 inch
|
|
|
|
Spokes - 5.50 inch (90 degree Angle)
|
|
Spokes - 6 inch (90 degree Angle)
|
|
|
|
|
|
Set of 28 spokes with 90 degree Angle.
Size: 5.50 inch
|
Set of 28 spokes with 90 degree Angle.
Size: 6 inch
|
|
|
|
Sprocket - 37 Tooth, Rear
|
|
Sprocket - CNC Sprocket (39 tooth #428 chain)
|
|
|
Our Price: $79.95
Sale Price: $39.95
You save $40.00!
|
|
|
|
|
Specifications:
Chain Size: # 420
37 Tooth Rear Sprocket
Bolt Hole Spacing: 1.65 inch / 42 mm
or
Bolt Hole Spacing: .86 inch / 22 mm
Center Diameter: 32mm / 1.26 inches
Total Diameter: 152mm-153mm / 6.3 inches
|
39 tooth CNC Sprocket
Chain Size #428
|
|
|
|
Sprocket - Front, #420 - 14 Tooth
|
|
Sprocket - Front, #420 - 15 Tooth
|
|
|
|
|
|
Specifications:
Chain Size: # 420
14 Tooth Front Sprocket
Shaft Hole Diameter: 0.66 inch or 17mm
Bolt Hole Spacing: 1.18 inch or 30mm (center to center)
|
Specifications:
Chain Size: # 420
15 Tooth Front Sprocket
Shaft Hole Diameter: 0.66 inch or 17mm
Bolt Hole Spacing: 1.18 inch or 30mm (center to center)
|
|
|
|
Sprocket - Front, #420 - 16 Tooth
|
|
Sprocket - Front, #420 - 17 Tooth
|
|
|
|
|
|
Specifications:
Chain Size: # 420
16 Tooth Front Sprocket
Shaft Hole Diameter: 0.66 inch or 17mm
Bolt Hole Spacing: 1.18 inch or 30mm (center to center)
|
Specifications:
Chain Size: # 420
17 Tooth Front Sprocket
Shaft Hole Diameter: 0.66 inch or 17mm
Bolt Hole Spacing: 1.18 inch or 30mm (center to center)
|
|
|
|
Sprocket - Front, #428 - 14 Tooth
|
|
Sprocket - Front, #428 - 15 Tooth
|
|
|
|
|
|
Specifications:
Chain Size: # 428
14 Tooth Front Sprocket
Shaft Hole Diameter: 0.66 inch or 17mm
Bolt Hole Spacing: 1.18 inch or 30mm (center to center)
|
Specifications:
Chain Size: # 428
15 Tooth Front Sprocket
Shaft Hole Diameter: 0.66 inch or 17mm
Bolt Hole Spacing: 1.18 inch or 30mm (center to center)
|
|
|
|
Sprocket - Front, #428 - 16 Tooth
|
|
Sprocket - Front, #428 - 17 Tooth
|
|
|
|
|
|
Specifications:
Chain Size: # 428
16 Tooth Front Sprocket
Shaft Hole Diameter: 0.66 inch or 17mm
Bolt Hole Spacing: 1.18 inch or 30mm (center to center)
|
Specifications:
Chain Size: # 428
17 Tooth Front Sprocket
Shaft Hole Diameter: 0.66 inch or 17mm
Bolt Hole Spacing: 1.18 inch or 30mm (center to center)
|
|
|
|
Sprocket Bracket
|
|
Sprocket Bracket
|
|
|
|
|
|
|
Sprocket Gasket
|
Sprocket Bracket
|
|
|
|
Stainless Steel-Braided Hydraulic 28 inch Brake Hose
|
|
Stainless Steel-Braided Hydraulic 40 inch Brake Hose
|
|
|
|
|
|
|
|
|
|
|
|
Stand - Alloy Dirt bike foot stand
|
|
Starter Button and Kill Switch
|
|
|
|
|
|
|
Alloy Dirt bike foot stand
Color: Red, Blue, Silver, Gold, Green
Suitable dirt bike
|
Universal Starter Button and Kill Switch with four wires.
|
|
|
|
Starter Motor - Lower (2 bolt pattern)
|
|
Starter Motor - Upper (3 bolt pattern)
|
|
|
|
|
|
Fits the X7 4-Stroke/ FS529A and other 49cc models with same style starter.
Click on photo for more information.
|
Fits the X7 4-Stroke/ FS529A and other models with the same style starter.
Click on photo for more information.
|
|
|
|
Starter Solenoid
|
|
Stator / Magneto - 50-110cc ATV (33mm Center Hole)
|
|
|
|
|
|
|
12v universal starter solenoid.
|
Stator / Magneto 50-110cc.
Specifications:
Center Hole Diameter: 33mm
Mounting Holes Spacing: 71mm (center to center)
Overall Length: 112mm (at longest point)
Overall Height: 97mm (at longest point)
Overall Thickness: 41mm (includes electrical coils)
Wires:
7 wires, 2 Male and 4 Female
|
|
|
|
Stator / Magneto - 50cc to 110cc ATV (18mm Center Hole)
|
|
Stator, 4-Stroke 50 - 110cc
|
|
|
|
|
|
Stator / Magneto 50cc to 110cc.
Specifications:
Center Hole Diameter: 18mm
Mounting Holes Spacing: 102mm (center to center)
Overall Length: 135mm (at longest point)
Overall Diameter: 115mm
Overall Thickness: 50mm (includes electrical coils)
Wires:
7 wires, 2 Male and 4 Female
|
Stator is compatible with 50 - 110cc 4-stroke engines.
Specifications:
Center hole Diameter: 29mm
Overall Diameter: 83mm.
Mounting hole Spacing: 41mm apart (center to center)
Mounting holes diameter: 7mm
Wiring: Group of 5 wires and one wire connected to another small module.
Click on image for more details.
|
|
|
|
Stock Heel Toe Shifter (chrome)
|
|
Super Coil - 50-110cc
|
|
|
|
|
|
|
Stock Heel Toe Shifter for the 70-110cc 4-Stroke Bikes, ATVs and other models with the same style shifter.
|
With this super coil, you get better combustion, resulting in increased horsepower and torque.
Fits 50cc - 110cc four stroke engines.
|
|
|
|
Swing Arm - Dirt Bike Alloy Swing Arm - Version 1
|
|
Swing Arm - Dirt Bike Alloy Swing arm - Version 2
|
|
|
|
|
|
|
|
Dirt Bike Alloy swing arm
|
Dirt Bike Alloy swing arm
|
|
|
|
Throttle Housing - OEM Alloy Throttle Housing (universal fit)
|
|
Throttle - Alloy Throttle Controller For Dirt Bike
|
|
|
|
|
|
|
OEM Alloy Throttle Housing
Universal Fit
|
Alloy Throttle Controller For Dirt Bike
Color: Black
Suitable for dirt bike
|
|
|
|
Throttle Cable - (90 degree elbow)
|
|
Throttle Cable - (strait ends 32")
|
|
|
|
|
|
Dirt Bike Throttle Cable
Specifications:
Overall Cable Length: 34.25 inches
Outer Black Sleeve: 27.25 inches
|
Dirt Bike Throttle Cable
Specifications:
Overall Cable Length: 32 inches
Outer Black Sleeve: 26.5
|
|
|
|
Throttle Controller
|
|
Timing Chain - 10 1/8 inch, 25H
|
|
|
|
|
|
|
Alloy Throttle Controller
|
4-stroke 25H Timing Chain.
|
|
|
|
Timing Chain - 10 3/8 inch, 25H
|
|
Timing Chain - 7 5/8 inch, 25H
|
|
|
|
|
|
|
4-stroke 25H Timing Chain
|
4-stroke 25H Timing Chain.
|
|
|
|
Tread lock / Lock Tight (Med strength) 50g bottle
|
|
Tripple Tree - Alloy Fork Tripple tree
|
|
|
|
|
|
Tread lock / Lock Tight (Med strength) 50g bottle.
Helps to prevent nuts and bolts from loosening due to vibration.
|
Alloy Fork Rudder Seat
Color: Red, Blue, Black,Gold, Green
Suitable dirt bike
|
|
|
|
Tripple Tree - CNC Fork Triple Tree
|
|
Valve Assembly - 50cc
|
|
|
|
|
|
CNC - Fork Triple Tree
Used on inverted style forks.
|
4-Stroke 50cc Valve Assembly
|
|
|
|
Valve Assembly - 70cc -110cc
|
|
Valve Cap - Alloy Tire Valve Cap
|
|
|
|
|
|
|
4-Stroke 70cc to 110cc Valve Assembly
|
Alloy Tire Valve Cap
Color: Red, Blue, Black, Silver, Gold, Green
|
|
|
|
Valve Cap - Alloy Tire Valve Cap
|
|
Valve Cap - Alloy Tire Valve Cap
|
|
|
|
|
|
|
Alloy Tire Valve Cap
Color: Red, Blue, Black, Silver, Gold, Green
|
Alloy Tire Valve Cap
Color: Red, Blue, Black, Silver, Gold, Green
|
|
|
|
Valve Cap - Alloy Tire Valve Cap
|
|
Valve Cap - Alloy Tire Valve Cap
|
|
|
|
|
|
|
Alloy Tire Valve Cap
Color: Red, Blue, Black, Silver, Gold, Green
|
Alloy Tire Valve Cap
Color: Red, Blue, Black, Silver, Gold, Green
|
|
|
|
Valve Guide Seal Pair-70-110c
|
|
Valve set - 50cc
|
|
|
|
|
|
|
Click on image for more details.
|
4-Stroke 50cc Valve set
|
|
|
|
Valve set - 70cc-110cc
|
|
Voltage Regulator, 12volts
|
|
|
|
|
|
|
4-Stroke 70cc to 110cc Valve set
|
12v Voltage regulator for all for all pocket bikes and scooters.
|
|
|
|
Wheel - 12 inch Front Alloy Wheel and CNC Hub (1.85 X 12 32H)
|
|
Wheel - 12 inch Rear Alloy Wheel and CNC Hub (1.85 X 12 32H)
|
|
|
|
|
|
|
Dirt Bike Alloy Rear Rim with CNC Wheel Hub
Markings on Rim: 1.85 X 12 32H
Click on image for more details.
|
Dirt Bike Alloy Rear Rim with CNC Wheel Hub
Markings on Rim: 1.85 X 12 32H
Click on image for more details.
|
|
|
|
Wheel - 12 inch Rear Alloy Wheel and Hub (Disk Brake Version)
|
|
Wheel - 14 inch Front Alloy Wheel and Hub (Disk Brake Version)
|
|
|
|
|
|
|
Rear 12 inch Alloy Wheel and Hub (Disk Brake Version)
Specifications:
Rim Size: 1.85 X 12 - 32H
|
Front 14 inch Alloy Wheel and Hub (Disk Brake Version)
Specifications:
Rim Size: 1.40 X 14 - 28H
|
|
|
|
Wheel - Dirt Bike Wheel Spoke Screw
|
|
|
|
|
|
|
|
Dirt Bike Rim Spoke Screw
|
|
|
